Full Range Of Heat Pump Accessories
Heat Pump Accessories
-
Auto Air Vent 15mm
15mm Auto Air Vent Compression
£9.21
-
Single phase digital kWh meter
SDM120DB-MID single phase digital kWh meter (45A direct connected – pulsed output) The SDM120DB family of meters have been produced to offer a low-cost solution to metering low Amp circuits. The SDM120D range work directly connected to a maximum load 45A AC circuit. All versions of the SDM120D meter come with a pulsed output for remote monitoring. All SDM120D meters are housed in a Dinrail mounted housing. They also come complete with sealable terminal covers to stop any tampering with the connections.
£26.79
-
Lever Handle Ball Valves
WRAS approved Suitable for hot and cold water Supplied with blue handle and red handle sleeve Available in 15, 22, 28, 35, 42 & 54mm Pressure rating of PN25 Working temperature of -10°C to 110°C
£35.71
-
Time Fused Spur
Up to 4 ON and OFF programmes available daily. Rated: 13A Resistive (3kW)Switches up to 750W incandescent or halogen lighting,500W fluorescent lighting,100W compact fluorescent lighting (cfl’s) and200W LED lighting. Not suitable for discharge lighting. Red LED ‘Mains ON’ and green LED ‘Output’ indicators for easy viewing. Permanent OFF and timed outputs available. Easy view 24 hour digital clock/timer display. Optional 1 or 2 hour boost facility. Automatic summer/winter time changeover. Self-cancelling override. Shortest switching time 1 minute. Programme advance and review options. BS1362 fuse replaceable from front. Double pole switch for ease of control. Integral memory back up battery retains programmes in event of power failure. Ideal for replacing single gang connection unit or fixed appliance outlets. Fits a single gang wall box min. 25mm deep. Note: Product not suitable for discharge lighting.
£62.14
-
Heat Pump Feet x3
600MM Rubber ASHP Feet x 3 Comes With 6 Stud Nuts, 3 Labels Width-180mm 600-Length Height-100MM
£70.79
-
Flexi-Hose Pre-Insulated 28mm dia (pair)
hoses are specifically designed for use with heat pumps. Flexible hoses allow for easy connection between the heat pump and associated equipment whilst reducing vibration to the pipework. The hoses are supplied with thick weatherproof insulation to reduce heat losses and have a swivel connection on the heat pump end and a compression joint to connect to the pipework inside or outside of the building. Max. pressure: 10 bar Max. temperature: 90˚C
£86.43
-
FLOW BALANCING VALVE WITH FILL & FLUSH 28mm
Description Regulates the flow of fluid through the system Inta INFBV28 (4 - 40 L/min) flow balancing valve with 28mm compression connections. Maximises heat collection in cylinders Bi-directional ball valve stops water flow and allows access to fill and flush connection for servicing 28mm compression connections according to EN1254-2 G 3/4″ Fill & Flush connections with retained sealing cover caps Clear window allows for easy adjustment of the flow rate Suitable for use with water and up to 50% glycol solution
£87.14
-
Glycol - 25L
Heat Pump Fluid Glycol Concentate Blended with advanced inhibitor and biocidal properties. Suitable for air and ground source heat pumps and all HVAC systems.
£92.14
-
Honeywell Home V4044C1569 Motorised Diverter Valve 28mm
The V4044 Motorised Diverter Valve has been designed to control the flow of water between heating and hot water in domestic fully pumped central systems. The Diverter Valve will only allow flow to one zone at any one time. The V4044 is used in the Sundial W Plan Hot Water priority system. Valve opens to Port A (from Port B) in 18 seconds (under power). Valve opens to Port B in 8 seconds (under spring return).
£92.86
-
Magnetic Filter
● Pack A - Dirtmag iQ™ Prime magnetic filter, iQ3 500ml Benchmark approved system cleaner, iQ1 500ml Benchmark and Buildcert approved system inhibitor for treating systems up to 100 litre (approx. 10 radiators). ● Dirtmag iQ™ Prime full bore isolation valves, full bore bottom entry discharge valve and dosing facility via a ½” air vent enables unrivalled ease of system commissioning. 28MM
£107.13
-
Wita - 8M Head - PWM Cable Inc
Data Sheet - Click Here Includes 1x Circulation Pump 1x Manual 1x Mains Power Cable 2x Rubber Pump Washers Features 5 year warranty SMART Adapt Anti Cease Function Venting Programme Key Lock 8 Meters Head Manufactured In Europe
£127.14
-
Metal Condensate Collection Tray - 1300mm
Data Sheet - Click Here Metal Condensate Collection Tray is designed to efficiently collect and drain condensate from air conditioning units. It features: Concave profile for effective water drainage. Recessed, surface-flush drain pipe adaptor to minimize standing water. Durable metal construction with corrosion-resistant coating. 1/2" BSP male thread on drain outlet for secure drainage connection. Compatible with Pump House brackets for easy installation. This tray provides a reliable solution for managing condensate in HVAC systems, ensuring clean and efficient operation.
£136.34
-
Low Loss Header
This is a modern, cost-effective solution for heating systems using Low Loss Headers (also known as Hydraulic Balancers). These components help optimize the operation of multi-boiler and multi-circuit heating systems by separating boiler circulation from heating circuits, thereby enhancing efficiency and system longevity. Key points: Compatibility: All headers are tested for pressurized systems up to 10 bar. Functions: They balance flows automatically and incorporate desilter and air vent functions. Operation Modes: The balancer adjusts its operation based on the heat demand relative to the boiler’s output: When heat demand equals boiler output, it maintains a stable flow. If the demand is less, it signals the boiler to decrease power or switch off. If the demand exceeds the boiler’s output, it signals the boiler to increase power. Model Example (SHE 1"): Max flow: 2.3 m³/h Max power: 40 kW Temperature tolerance: up to 110°C Pressure: 10 bar Capacity: 1 liter Advantages for investors: Up to 30% longer boiler service life due to protection from low return water temperature Increased operational comfort thanks to system desilting and aeration Up to 30% longer pump service life due to undisturbed mutual operation Quicker boiler response Up to 50% cost savings compared to 3- or 4-way valves Advantages for installers: No system regulation needed due to automatic pump operation Reduced claims caused by improper system operation or air locking Automatic operation simplifies installation and maintenance Available variants: SHE – LLH: Power ranges from 40 to 420 kW SHE-OC: Insulated versions (PUR foam + leatherette coating), powers from 40 to 115 kW (models with 225 and 420 kW can be insulated with ROCKWOOL if requested) SHE-SP: Balancers with stainless steel replaceable air separators, powers from 25 to 209 kW Summary: Using Low Loss Headers (Hydraulic Balancers) provides a reliable, efficient, and economical solution for heating systems—contributing to longer system lifespan, improved comfort, and cost savings.
£192.85
-
Heat Pump Wall Bracket - 3 Arm XXL
Data Sheet - Click Here These flat-packed, self assembly brackets provide a professional finish to the installation of wall mounted outdoor condensing units and air source heat pumps. The Type 2 bracket have a crossbar allowing the uprights to be spaced exactly as required, and include wall spacers to help level the unit on uneven walls. All components receive a powder coating,with a scratch resistant, textured finish in a colour (RAL 7032) to match most brands of condensing units and domestic air source heat pumps. heat pumps mounted on a wall bracket may NOT be MCS-compliant, please make sure the minimum clearances are met behind the heat pump Features: • Uprights mount anywhere on the crossbar which enables the arm span to be adjusted easily• Adjustable wall spacers to level the arms• Safe working load up to 200kg• Suitable to match most brands of condensing units and domestic air source heat pumps• Textured finish in (RAL 7032)
£235.71
-
50L Buffer Vessel wall/floor mounted
Installation Manual - Click Here Data Sheet - Click Here The 50L buffer vessel adds additional water volume to the circuit to help achieve the systems minimum water content as well as providing hydraulic separation between the primary and secondary circuits, and helps eliminate compressor pump short cycling. These use polyurethane foam insulation which provides minimal heat loss. They also come with adjustable wall brackets to assist in the event of an uneven install surface and have additional connections for venting and drainage.
£248.21
-
Midea Installation Pack
Full Installation Pack Flow Meter & Fittings x 1 Lever ball Valves x 2 Flexi Hoses 28mm (Pair) x 1 Auto Air Vent 28mm x 1 Feet x 3 25L Glycol x 1 Wita 8m x 1 PumpValves x 2 3 Port valve x 1 50L buffer x 1 32 AI Isolator Elec Meter x 1 Time Fused Spur x 1 Part 4. - GS 1" BSPM to 28mm Comp. x 4
£1,014.41